Configure External Server Feedback from Device LCD

Follow the below mentioned steps to configure External Server Feedback from the Device:

 

1. On Device >> Navigate to the Communication app >> Navigate to External Server Feedback Settings.

   

2. The external Server Feedback setting will be disabled by default, you need to enable it.

   

3. After enabling the External Server Feedback setting on the Device, you need to enter the IP address, Default Port will appear, and Default Response Timeout (in seconds) will appear.

   

4. After entering the details, to check whether the External Server Feedback is connected with the utility, you can do Test Connection from the Device.

   

5. On successful authentication, the following notification will be displayed on Device’s LCD.

   

6. On authentication denied following notification will appear on the Device’s LCD.